How much does a floatron® cost?
£200 inclusive of VAT and comes complete with electrode, ion test kit, cleaning brush and plastic screen. The floatron® should pay for itself within two years in an average size pool.

How does floatron® work?
It converts water into mineral water by using solar power and a long lasting sacrificial electrode containing copper, silver and other trace minerals.

I have a pool cover, so surely floatron® won't work with a cover?
Nearly all UK customers who purchased floatron® have covers on their pools and all feedback has been very positive with floatron® working well with most varieties of cover that float directly on the water. The choices are to open the cover enough to float the unit, or cut a 3 inch (~7cm) "X" into the cover which allows the electrodes to remain in the water while the top is exposed to the sun. If you are unsure on fitting, especially with a slatted cover, we will be happy to advise you. Please contact us if you have a safety cover

We have cut a cross into our bubble cover, this allows theWith a slatted cover the slats can be cut as above
solar panel to be exposed while the electrode is underwater

How much does it cost to fit?
Nothing. Just tether it near to an inlet or outlet, so water can pass through.

How big is it?
Just the size of a frisbee. It's in a box 12 x 12 x 8" and weighs around 5 lbs.

How many floatrons® do I need?
Pools of up to 20,000 imperial gallons (91 cubic metres) need only one floatron®. Larger pools need two or more.

Does it work in indoor hot tubs and spas?
Yes! Think of the convenience in not having to shower afterwards!

Does floatron® work in indoor pools?
Yes, if there is plenty of daylight. But any floatron® purchased from floatron UK can be returned for a full refund. *conditions apply

Will it work in a salt pool?
Brilliantly. Simply reduce the operating time of the salt chlorinator.

Does floatron® work in fishponds?
Yes, providing there's circulation and the water is captive.

It'll kill my fish!
So long as you follow the instructions, we can assure you that your fish will remain healthy, and you'll be able to see them clearly!

My pool dealer says floatron® is rubbish!
Pool dealers make most of their money from chemical sales, so are likely to be reluctant to recommend floatron® which will cut chemical sales.

I don't spend much on chemicals, so why should I buy one?
Some people have neutral water of 7.4 pH. In these circumstances, chlorine is effective and not so necessary, but you are in a minority. I bet you dose hugely at close down, start up and on return from holiday. Remember no algaecide, no shock treatments.

Can you guarantee it will work?
Yes, provided you have quality sand in the filter and pH between 7.2 and 7.8.

Are there any circumstances under which it won't work?
Yes, if the pool leaks or the sand in you pool filter needs replacing, (some filters i.e. cartridge filters or diatomateus earth filters do not contain sand, therefore this will not be an issue) or if the pH is outside the 7.2 - 7.8 range.

Why do you recommend that I change the filter sand before using floatron®?
Various chemicals, in particular some flocculents as well as excess shock treatment and long periods of chlorination, can have an adverse effect on the sand and make it capable of removing the minerals which floatron puts into your pool. Most pool experts recommend that the filter sand is replaced at least every three years. Filter sand can be purchased at a minimal cost from your local pool dealer.

Flocculents
Occasionally pool water may become cloudy due to a build up of undissolved solids and ammonia, this is normally treated with a flocculent, however some of these can have a detrimental effect on pool filter sand causing the filter to remove the minerals produced by floatron, this is easily detected by mineral testing the backwash water. We recommend Jolly Gel, which has proved to work excellently along side floatron - please contact us if you would more information on Jolly Gel.

What type of Chlorine do you recommend for use alongside floatron?
We recommend large slow release chlorine tablets (they are about the size of a tin of shoe polish) for example Fi-Clor Stabilised Chlorine 200gsm Maxi tablets

How long before floatron® takes over the purification process?
The average pool size is 15,000 gallons (68 cubic metres). On average, three weeks. Then you start enjoying bathing in clear, safe and clean water.

Can you summarise the benefits and tell me why should I buy floatron®?
It's the only solar powered purifier on the market that doesn't require costly, complicated fitting and that works well with a pool cover. It's a quality product with a extensive warranty. It's healthy for your swimmers, your fish and for the environment. It will eliminate the problems associated with too much chlorine. It works. Please call us if you have any further questions. It is important to us that all out customers are happy with the floatron® - happy customers are our best from of marketing!

Top of page

Please note the following before using your floatron® :

1) Read the instructions, they may appear lengthy, but are a very comprehensive guide to pool management, if you stick to them, you shouldn't have any problems.

2) If you do have any problems of questions, please contact us